Niceley's Notes | Blog

How Do I Know If My Washer Is Energy-Efficient?

Written by Jeff Niceley | Oct 8, 2024 1:15:00 PM

In today’s eco-conscious world, energy efficiency is more important than ever. Not only does an energy-efficient washer help reduce your utility bills, but it also minimizes your environmental impact. If you’re wondering whether your current washing machine is energy-efficient or looking to buy a new one, here’s how to determine its efficiency and enjoy the benefits of a more sustainable lifestyle.

Look for the ENERGY STAR® Label

One of the easiest ways to identify an energy-efficient washer is to check for the ENERGY STAR® label. This label, awarded by the U.S. Environmental Protection Agency (EPA), signifies that the appliance meets strict energy efficiency guidelines. These guidelines are based on rigorous testing and are regularly updated to reflect technological advancements. ENERGY STAR® certified washers use about 25% less energy and 33% less water than regular models, making them a smart choice for your wallet and the environment.

 

SOURCE: https://consumer.ftc.gov/articles/how-use-energyguide-label-shop-home-appliances

Check the EnergyGuide Label

Another helpful tool is the yellow EnergyGuide label found on most new appliances. This label estimates the washer’s annual energy consumption in kilowatt-hours (kWh) and compares it to similar models. This comparison is important because it shows how the washer's energy efficiency stacks up against others in the market. The lower the number, the more energy-efficient the washer. The label also includes the estimated annual operating cost based on the national average electricity rate, helping you understand how much you’ll likely spend on energy each year.

Consider the Water Factor (WF)

The Water Factor (WF) is a measurement used to determine how much water a washer uses relative to its capacity. It’s calculated by dividing the total water used per cycle (gallons) by the machine’s capacity (cubic feet). A lower Water Factor indicates higher water efficiency. ENERGY STAR® qualified washers typically have a WF of 6 or lower. The WF is an important metric if you’re concerned about water and energy usage.

Assess the Washer’s Capacity

Washer capacity plays a significant role in energy efficiency. Larger capacity washers can clean more clothes in a single load, reducing the number of loads you need each week. However, it’s important to balance capacity with your household’s needs. A washer that’s too large for your needs might lead to wasted energy and water, while a washer that’s too small could result in more frequent cycles, increasing energy use.

Examine the Spin Speed

The spin speed of a washer, measured in revolutions per minute (RPM), affects how much water is removed from your clothes before drying. Washers with higher spin speeds extract more water, reducing drying time and energy use. If your washer has a high spin speed (typically 1,200 RPM or more), it’s likely contributing to overall energy efficiency by lowering the energy needed to dry clothes.

 

Compare Front-Load vs. Top-Load Washers

Front-load washers are generally more energy-efficient than traditional top-load models. They use less water per cycle and require less energy to heat that water. Additionally, front-load washers have faster spin cycles, which means less moisture in the clothes and shorter drying times. If you’re shopping for a new washer and energy efficiency is a priority, a front-load washer is typically the better option.

Check for Eco-Friendly Settings

Many modern washers have eco-friendly settings designed to reduce energy and water use. These settings may include cold wash options, which use less energy for heating water, and quick wash cycles that shorten the washing time. If your washer has these settings, using them regularly can enhance the machine’s overall energy efficiency.

Evaluate the Age of Your Washer

If your washer is over ten years old, it’s likely less energy-efficient than newer models. Advances in technology over the past decade have led to significant improvements in energy and water efficiency. By evaluating the age of your washer, you can take a proactive step towards reducing your utility bills and environmental impact.

 

Determining whether your washer is energy-efficient involves:

  • Checking for ENERGY STAR® certification.
  • Reading the EnergyGuide and Water Factor labels.
  • Considering the washer’s capacity and spin speed.
  • Evaluating its age and available settings.

By understanding these factors, you can make informed decisions about your current washer or when purchasing a new one. Investing in an energy-efficient washer helps the environment and saves you money in the long run, making it a win-win situation for you and the planet.